Boulder 3050 Mono power amplifiers


SKU: PAN01-1-1-1-1-1-1-1-1-1-1-1


Enquire now


Boulder’s flagship is their largest, most powerful, and best sounding product in over 30 years of design. These are Boulder’s premier power amplifiers. Few people will ever see or hear them and fewer still will be lucky enough to own them. And yet because of their very existence the limits of sound reproduction have been pushed further than ever before. At every step of their development, one fundamental objective was consistent: the pursuit of absolute perfection in sound quality. Mission accomplished.

Innovative technologies, intelligent construction and unmistakable design redefine the idea of striving for perfection. Over time these efforts become second nature. Boulder’s 3000 Series is the summit of high performance.

  • Boulder’s biggest, most powerful, and highest performing amplifier, each built to order for its new owner
  • Completely designed, manufactured, and hand-assembled at our facility in Louisville, Colorado
  • 1,500 Watt power output into any load means absolute clarity and control of loudspeakers
  • Black granite and stainless steel base, cut to match the angles and footprint of both the left and right amplifiers
  • Intelligent microprocessor control so amplifiers can automatically set proper turn-on sequence via Boulder Link and transmit any necessary information to a Boulder preamp’s display
  • Every 3050 contains two of Boulder’s highest performing gain stages, the 99H, available only in 3000 Series products
  • Full Class-A biasing to maximum output, managed with an analogue circuit that reduces bias current whenever possible to increase efficiency and reduce heat
  • 120 output transistors for unequalled damping and power delivery
  • Four transformers per amplifier, each DC filtered, sealed in machined housings, and potted in a proprietary epoxy for silent operation
  • Circuit boards are installed in aluminium mounting frames precisely machined to fit the board and sandwiched with a layer of damping material
  • Left and right amplifier chassis are mirror-imaged and feature multiple surface angles to break up any reflected sound
  • Differentially balanced, instrumentation-style input circuitry for ideal electrical interface with any preamplifier or source component
    • Specification:


  • Continuous Power, Each Channel: 1,500W into 8Ω, 4Ω or 2Ω
  • Peak Power, Each Channel: 2,100W into 8Ω, 3,000W into 4Ω and 6,000W into 2Ω
  • Equivalent Input Noise (EIN), 20kHz BW 1.5 µV
  • Magnitude Response, 20 to 20KHz 0.00, -0.04 dB
  • Magnitude Response, -3dB at 0.015Hz, 200kHz
  • Voltage Gain 26dB
  • Input Impedance Balanced: 200KΩ, Unbalanced 100KΩ
  • Common Mode Rejection (Balanced only) 60 Hz: 90dB, 10kHz: 70dB
  • Inputs 3-pin Balanced
  • Output Connectors 2 sets of 6 mm / .250 inch wing screws
  • Power Requirements 220-240 VAC 50-60 Hz, 300W nominal, 6000 W at maximum output
  • Weight Amplifier: 355 lbs. (161 kg), Granite Base: 86 lbs. (39 kg), Shipping: 563 lbs. (256 kg)


There are no reviews yet.

Be the first to review “Boulder 3050 Mono power amplifiers”

Your email address will not be published. Required fields are marked *

©DB Hifi

Website by Unity Online