Audiophiles, serious Audiophiles, have not considered an integrated amplifer as worthy product for 30+ years. This paradyme is about to change, forever!
Integrated amplifers typically have between 6 and 9 gain stages.
The Pass Laboratories Integrated amplifers are two gain stage devices based on our X.5 series power amps. The unique topolgy proved the cleanest, most direct signal path possible. This approach provides superlative “audiophile” performance in an otherwise modest package.
The INT-30 amplifer is the “jewell in thecrown”. It provides 30 watts into 8 ohms, 60 watts into 4 ohms and is stable into any concievable load. It provides wattage with all the finess and delicacy that Class A operation has long been famous for. Best with speakers of 87 dB efficieniency or greater, spectacular with difficult speaker loads such as electrostatics or planars in small systems. Wonderful, “you are there” soundstage.
The INT-30A is a very seductive and addictive product in a small reference system. Equally seductively and attractive for a second system with either music or movies
Gain (dB): 26
Volume control (1dB steps): 63 dB
Frequency Response: -3 dB at 1.5 Hz and 60 KHz
Power Output/ch (8 ohm): 30
Distortion (1 KHz, full power): 1%
Input Impedance (Kohms) ea Leg: 36 / 18
Damping Factor: 150
Output Noise (uV): <300
Power Consumption (Watts): 200
Temperature (deg C.): 53
Dimensions (W x H x D): 19 x 7 x 19
Weight (LBS): 60
|Dimensions||48.26 x 48.26 x 17.78 cm|