01379 873451 | info@dbhifi.co.uk

D150

D150

£4,100.00

Categories: , Brand:

Product Description

The D150 Digital Preamplifier expands McIntosh’s digital music capabilities by supporting many of the newest digital audio formats such as DSD and DXD. A USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DXD 352.8kHz and DXD 384kHz. Two coaxial and two optical inputs accept up to 24-bit/192kHz signals. It is a simple solution to add the latest digital music formats to your existing system.

Balanced and unbalanced connections are available for both variable and fixed volume audio outputs, providing flexibility in setting up and connecting your system. Or simply add an amplifier, a pair of speakers and a digital source for a complete digital based stereo system. For enjoying SACDs, the unique MCT input connects to select McIntosh models with a MCT output – like the MCT500 SACD/CD transport – to deliver the purist possible sound quality. It’s also flexible enough to be used as a headphone amplifier; just connect your digital sources and a pair of headphones, such as the MHP1000 (not included), for a personal listening experience.

The D150 uses the same revered DAC that was found in the D100, featuring an 8 channel, 32-bit, 500kHz D/A converter with wide dynamic range and extremely low distortion. Eight channel D/A converter is used in stereo Quad Balanced mode. Music at all levels is reproduced with extreme precision and elegance. A 1/8” mini jack is provided for control data from the data output jack of a McIntosh preamp or A/V Control Center. It shares the classic façade, knobs and handcrafted black-glass front panels as all other McIntosh components in a small form factor of just under 4″ in height.

Custom Specifications

ELECTRONIC SPECIFICATIONS
Total Harmonic Distortion: 0.0015%
Frequency Response: +/-0.5dB from 4Hz to 20,000Hz; +0.5/-3dB from 4Hz to 68,000Hz (Source dependent)
Maximum Volts Out (Balanced / Unbalanced): 16/8 V RMS
Input Impedance (Balanced / Unbalanced): N/A
Phono Voltage Gain: N/A
High Level Voltage Gain: N/A
Signal To Noise Ratio: 110dB
Dual Mono Power Supply: No
Dual Mono, Fully Balanced: Digital, Fully Balanced

CONNECTIVITY
Balanced Input: 0
Unbalanced Input: 0
Phono Input Moving Coil: 0
Phono Input Moving Magnet: 0
Digital Coaxial Input: 2
Digital Optical Input: 2
Digital MCT (DIN) Input: 1
Digital USB Input: 1 (2.0, 32/192 Asynchronous)
44.1kHz to 384kHz, 32-Bit (PCM) DSD64, DSD128, DXD352.8kHz, DXD384kHz
Digital AES/EBU Input: 0
Balanced Fixed Output: 1 Stereo
Balanced Variable Output: 1 Stereo
Unbalanced Fixed Output: 1 Stereo
Unbalanced Variable Output: 1 Stereo
Headphone Output: 1/4″ High Drive
Record Processor Loop: No
Input Level Match: No
Home Theatre PassThru: No
Unbalanced Analog Connector Type: Standard

CONTROL
Tone Controls: No
Tone Bypass and Input Assign: No
RS232 Control Input: No
Power Control Output: 1
Rear Panel Data Port: 1
Rear Panel IR Sensor Input: Yes

GENERAL SPECIFICATIONS
Multi-Chassis or Single: Single
Output Meters: No
Vacuum Tube or Solid State: Solid State
Power Consumption (On): 30 watts

WEIGHTS & DIMENSIONS
Dimensions (W x H x D): 17.5″ (44.45cm) x 3-7/8″ (9.8cm) x 16″ (40.64cm)
Weight: 13.5 lbs (6.1kg)
Shipping Weight: 28 lbs (12.7kg)

Reviews

There are no reviews yet.

Be the first to review “D150”

Your email address will not be published. Required fields are marked *