All as close to perfection as possible. It’s what characterises a top class pre-amplifier. The Soulution 520 pre-amplifier meets these challenges and more. With four line inputs and a high quality phono stage built in, the Soulution 520 pre-amplifier is perfectly equipped for all audiophile requirements.
A pre-amplifier should only amplify or attenuate the music signal, not change it in any way, while meeting the highest technical specifications. No distortion, no hum or noise, at the same time achieving the lowest cross talk and widest bandwidth. The soulution 520 pre-amplifier elegantly meets these demands and is a benign load for any source component.
Unbalanced design ensures the fewest components in the signal path. Physical separation of the left and right channel provides optimal separation and cross talk performance. High quality relays switch between the inputs. Source signals are buffered directly at the input. For safety, an audio grade coupling capacitor protects the pre-amplifier as well as downstream amplifiers and loudspeakers from potential DC components in source signals.
The 520’s volume control uses only high-precision, low-noise metal foil resistors, and it controls both the volume and balance. To block switching peaks during volume changes which may be hazardous to power amplifiers, the 520 is equipped with a second volume control with a PGA (Programmable Gain Amplifier). Active only during the volume control process, it is similar to a potentiometer and enables the volume to be adjusted in smooth, click-free steps. As soon as the new desired level value has been selected, the unit returns control to the precision resistors.
Multi-stage, similar to that used in the reference 720 pre-amplifier, it achieves very fast, ultra wideband (1MHz/-3dB) amplification and is able to drive the longest interconnects with ease.
Similar to the 720, the phono pre-amplifier of the 520 is also multi-stage using the highest grade components.
The 520 is operated via its front-panel buttons and rotary control. Multi-functional, these allow optimisation of the entire audio system, and an ideal set-up of the individual components.
– 2x balanced input (XLR)
– 2 x unbalanced input (RCA)
– 1x phono
– 1 x balanced (XLR)
– 1 x unbalanced (RCA)
Model 220–240V / 50–60Hz: 220 – 240V
Model 100–120V / 50-60Hz: 100 – 120V
OFF (standby): <0.5W
Input (IN 1 … IN 5)
Impedance: balanced (IN 1… IN2) 3kΩ / unbalanced (IN 3…IN4) 3kΩ / Phono (IN 5) adjustable
Gain: balanced -83…+16dB / unbalanced -89…+10dB
Frequency response: DC-800kHz
THD+N: <0.001% Signal-to-Noise Ratio: >120dB
Impedance: balanced 10Ω / unbalanced 10Ω