£354.75 – £554.75
It’s long been known that the quality of mains power can have a dramatic effect on the performance of hi-fi & home cinema systems. A clean, quality power supply requires cables resistant to external interference and noise on the mains itself.
The Eos 4dd Power Cable uses OFC 4mm² conductors in an aluminium foil screened configuration with our dd (dual drain) system and our precision-engineered mains plug. The Eos 4dd power cable is specifically designed for ‘high-end’ systems and high power devices, and is the optimum cable to use between wall socket and our Eos Modular power block.
Power management is required principally as a result of the increasingly negative impact of electrical, radio frequency and electromagnetic noise pollution flooding our homes and daily life. With increasing use of high resolution audio and video content our replay equipment has come under assault by extraneous high energy broad spectrum noise, both airborne and directly induced through the mains supply circuits.
Wi-fi networks, Bluetooth devices, mobile & domestic cordless phones, ‘wallwart’ power adapters, low voltage light bulbs & dimmer switches are among the worst noise-generating culprits.
Eos power cables are sophisticated products designed specifically to allow your equipment to perform properly. Built around high purity low resistance OFC (Oxygen Free Copper), with low series resistance, high-efficiency dielectrics and extensive screening, Eos 4dd power cables effectively filter out harmful incoming radio frequency and power contamination, dumping these rapidly to earth.
By comparison a typical domestic power lead in comparison, lacks the quality of component parts, screening layers, dual drain system and anti-vibration treatment Atlas employ in Eos. For maximum effectiveness, Eos cables are best used as part of a complete Power Management System.
At the equipment end of the power cable, options are 10A (standard ‘kettle-type’ connector used on most equipment) & 16A (high current, larger format connector) IEC and C7 (‘figure of 8’ connector).
Construction: Triple multicore dual drain
Dielectric: PTFE (Teflon™)
Screen: Braid + Mylar™, 100%
Capacitance: 95.09 pF/m
Inductance: 0.566 µH/m
Resistance: 0.0045 Ohm/m
Outside Diameter: 11.2mm
1.00m, 1.50m, 2.00m, 3.00m, 5.00m
C15 (10A), C19 (16A), C7