01379 873451 | info@dbhifi.co.uk

Zensor 5 AX

Zensor 5 AX

£799.00

Clear
SKU: N/A Categories: , Brand:

Product Description

Imagine a world where music just flows, where all you needed was a set of loudspeakers. No complex electronics, no unwanted cables, no jumble of remote controls, nothing but pure uncomplicated enjoyment.

DALI ZENSOR AX series set you free from the electronics traditionally associated with a high quality audio experience. Both the stand mount and the floor standing model come complete with all you need. They require nothing extra, just connect the mains and you are ready to play.

The built in 2 x 50W stereo all digital amplifier delivers the audio signal to both loudspeakers and is designed to bring out the best from its ZENSOR host regardless of the signal type. You can use Bluetooth and Apt-X if your device supports it, you can connect an analogue source with a mini-jack or an optical via TOSLink.

Place the ZENSOR 5 AX just where you would a traditional floor standing speaker and start playing music via Bluetooth. Connect your TV via the optical input or any type of traditional audio player via the analogue input.

The ZENSOR AX series has all of the virtues of a traditional stereo system with none of the down sides.

Custom Specifications

Product series: ZENSOR
Frequency Range (+/-3 dB) [Hz]: 43 – 26,500
Maximum SPL [dB]: 106
Crossover Frequency [Hz]: 2,400 Hz
Crossover Principle: 2-way
High frequency driver, Quantity: 1 x 25 mm
High frequency driver, Diaphragm type: Soft Textile Dome
Low frequency driver, Quantity: 2 x 5.25″
Low frequency driver, Diaphragm type: Wood Fibre Cone
Enclosure type: Bass Reflex
Amplifier Type: Fully digital class D (Open loop type)
Input Impedance [ohms]: 12.6k
Connection Input: 3.5 mm mini jack, Optical (Toslink)
Connection Output: SUB Out
Wireless Input(s): Bluetooth™ Apt-X
Magnetic Shielding: No
Recommended Placement: Floor
Recommended Distance From Wall [cm]: 20 – 80
Max. Power Consumption [W]: 160W
Standby Power Consumption [W]: <0.5W
Dimensions With Base (HxWxD) [mm]: 825 x 162 x 282
Weight [kg]: 11.0
Accessories Included: Manual, Mains Cable, Remote Control, Speaker Wire (For Right Speaker), Spikes, Rubber Feet
Analogue Input Sensitivity [mV]: 300
Continous IEC Amplifier Output [RMS watt]: 2 x 50W
Max. Digital Resolution [bits/KHz]: 24 / 96
Input Mains Voltage [Volts]: Universal mains 100 – 240V

Additional information

Finish

Black Ash – Vinyl, Light Walnut – Vinyl, White – Vinyl